Storewide Sales 8%-17% Off with special offers and discounts **Exclusions Apply** Learn More
Get A $50-$200 Gift Card After Your Purchase. LEARN MORE
Earn An Extra $1000 A Month When You Partner With Us. *Join Our Community*

Shopping Cart

0

Your shopping bag is empty

Go to the shop

Lab Gruppen | E 12:2 - Install Power Amplifier with 2 Flexible Output Channels | Lab Gruppen

ASK AN EXPERT

Our expertly trained Sales Engineers are ready to help!

810-331-0747
$1,399.00
In stock

Building on Lab Gruppen’s touring reputation for sonic excellence and rock-solid durability, E Series brings a competitive edge to the installation market by adding ultra-compact size, high operating efficiency, output configuration flexibility, and an unprecedented cost-benefit ratio. At the heart of E Series is Lab Gruppen’s IDEEA (IntelliDrive Energy Efficient Amplifier) technology. Based around a patented Class D variant output stage, IDEEA produces high power levels with very low distortion while drawing minimal mains current....

Read More
Lab Gruppen | E 12:2 - Install Power Amplifier with 2 Flexible Output Channels | Lab Gruppen

Lab Gruppen | E 12:2 - Install Power Amplifier with 2 Flexible Output Channels | Lab Gruppen

Building on Lab Gruppen’s touring reputation for sonic excellence and rock-solid durability, E Series brings a competitive edge to the installation market by adding ultra-compact size, high operating efficiency, output configuration flexibility, and an unprecedented cost-benefit ratio.

At the heart of E Series is Lab Gruppen’s IDEEA (IntelliDrive Energy Efficient Amplifier) technology. Based around a patented Class D variant output stage, IDEEA produces high power levels with very low distortion while drawing minimal mains current.

Lab Gruppen’s proprietary Rail Sensing Limiter (RSL), also exclusive to E Series, greatly reduces signal clipping to ensure high quality audio output at all times. User configurable for Hi-Z (70 V) or Lo-Z, RSL senses rail voltages and optimizes each output for instantaneous load conditions. RSL settings also facilitate asymmetric loading of the channels to optimize performance and efficiency. Total available output power can be allocated among the channels as required by the application. This makes it possible, for example, to drive a small sub on one channel, a number of 70 V ceiling loudspeakers on the second channel.

Product Specs

General
Number of amplifier channels 2
Max total output all channels driven 1200 W
Peak output voltage per channel 100 V / 70 Vrms
Max. output current 18 Arms
Max output power (all channels driven) 2 ohms: 600 W
4 ohms: 600 W
8 ohms: 600 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 300 W)
16 ohms: 310 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 150 W)
70 V: 600 W
100 V: Can deliver 600 W to a 100 V load tapped at 1200 W
Performance
THD 20 Hz - 20 kHz at 1 W <0.1%
THD at 1 kHz and 1 dB below clipping <0.05%
Signal to Noise Ratio >112 dBA
Channel separation (Crosstalk) at 1 kHz >70 dB
Frequency Response 2 Hz - 40 kHz
Input impedance 20 kOhm
Common Mode Rejection (CMR) 50 dB
Output impedance 25 mOhm
Gain, Sensitivity and Limiters
Limit and gain switch defining limit and gain (per channel) 2 pos: Lo-Z and 70 V
VPL for 70 V mode 100 V
VPL for Lo-Z mode 69.3 V
Sensitivity for stated power into 4 Ohm in Lo-Z mode 4 dBu
Sensitivity for 70.7 V out in 70 V mode 4 dBu
Sensitivity for stated power into 2 Ohm in Lo-Z mode 1 dBu
Sensitivity for stated power into 8 Ohm in 70 V mode 3.8 dBu
Sensitivity for stated power into 16 Ohm in 70 V mode 4 dBu
Gain in 70 V mode 35.2 dB
Gain in Lo-Z mode 32 dB
Level adjustment (per channel) Rear panel potentiometer, from -inf to 0 dB
Connectors and Buttons
Input connectors (per ch.) 3 - pin detachable screw terminals, electronically balanced
Output connectors (per ch.) 2 - pin detachable screw terminals
High pass filter Fixed at 50 Hz, switchable per channel
Power control Can be used to go between standby and ON
GPI (power control input) Contact closure type, 2-pin detachable screw terminal, controls the power state
GPO (power state output) Contact closure type, 2-pin detachable screw terminal, for external monitoring of the power state
Cooling Single fan, front to rear airflow, no filter required, temperature controlled speed
Power
Nominal voltage 100 – 240 VAC
Operating voltage 70 – 265 VAC
Standby consumption <1 W
Mains connector IEC inlet
Physical
Dimensions W: 483 mm (19”), H: 44 mm (1 U), D: 276 mm (10.9”)
Weight 4.2 kg (9.3 lbs)
Finish Dark grey aluminum front and black steel chassis
Approvals CE, RoHS, WEEE, UL (UL 60065), CSA C22.2 NO. 60065, FCC Part 15 Subpart B Class A, PSE, CCC Energy Star
For further assistance or questions please contact a Whoisblest Specialist by typing "Help" in our chatbox. We look forward to hearing from you.

Top-Sellers

...
Sale

AKG| K371 PROFESSIONAL HEADPHONES | AKG

0 Reviews

$149.00 $186.25

...
Sale