Storewide Sales 8%-17% Off with special offers and discounts **Exclusions Apply** Learn More
Get A $50-$200 Gift Card After Your Purchase. LEARN MORE
Earn An Extra $1000 A Month When You Partner With Us. *Join Our Community*

Shopping Cart

0

Your shopping bag is empty

Go to the shop

Shure | ULXD4 Wireless Receiver (G50 Band - 470-534 MHz) | Shure

ASK AN EXPERT

Our expertly trained Sales Engineers are ready to help!

810-331-0747
$1,019.00 $1,249.00
In stock

The Shure ULXD4 is a half-rack, networkable wireless receiver for use with ULX-D Wireless Systems. With an expansive set of professional features, including 24-bit / 48 kHz audio quality, efficient and intelligent RF performance, and AES 256-bit encryption, ULX offers uncompromising wireless tailored for professional sound reinforcement. Features Predictive switching diversity High Density mode optimizes ULX-D systems to simultaneously operate significantly more channels in applications up to 30 meters Intelligent scanning automatically finds and deploys...

Read More
Shure | ULXD4 Wireless Receiver (G50 Band - 470-534 MHz) | Shure

Shure | ULXD4 Wireless Receiver (G50 Band - 470-534 MHz) | Shure

The Shure ULXD4 is a half-rack, networkable wireless receiver for use with ULX-D Wireless Systems. With an expansive set of professional features, including 24-bit / 48 kHz audio quality, efficient and intelligent RF performance, and AES 256-bit encryption, ULX offers uncompromising wireless tailored for professional sound reinforcement.

Features

  • Predictive switching diversity
  • High Density mode optimizes ULX-D systems to simultaneously operate significantly more channels in applications up to 30 meters
  • Intelligent scanning automatically finds and deploys the cleanest frequencies to transmitters over IR sync
  • Interference detection and alerts provided on both the receiver and Wireless Workbench
  • Front panel gain adjustment buttons provide up to 60 dB additional gain
  • AES 256-bit encryption-enabled for applications where secure transmission is needed
    Ethernet networking provides streamlined setup across multiple receivers, Wireless Workbench 6 integration, and AMX/Crestron control
  • Support for frequency coordination with the Axient Spectrum Manager
  • Rugged metal chassis
  • Intuitive front panel LCD menu and controls with lockout feature
  • Upgraded LCD with adjustable contrast and brightness
  • Audio and RF LED meters with peak indicator
  • Remoteable 1/2 wave antennas
  • Furnished rack hardware

Product Specs

RF INPUT
Spurious Rejection >80 dB, typical
Connector Type BNC
Impedance 50 Ohms
Bias Voltage 12-13 V DC, 170 mA maximum, per antenna
AUDIO OUTPUT  
Gain Adjustment Range -18 to +42 dB in 1 dB steps (plus Mute setting)
Configuration 1/4" (6.35 mm): Impedance balanced (Tip=audio, Ring=no audio, Sleeve=ground)
XLR: Balanced (1=ground, 2=audio +, 3=audio -)
Impedance 1/4" (6.35 mm): 100 Ohms (50 Ohms Unbalanced)
XLR: 100 Ohms
Full Scale Output 1/4" (6.35 mm): +12 dBV
XLR: LINE setting= +18 dBV, MIC setting= -12 dBV
Mic / Line Switch 30 dB pad
Phantom Power Protection 1/4" (6.35 mm): Yes
XLR: Yes
NETWORKING Power Over Ethernet (PoE)
No, protected
Network Interface Single Port Ethernet 10 / 100 Mbps
Network Addressing Capability DHCP or Manual IP address
Maximum Cable Length 328 ft (100 m)
ADDITIONAL SPECS Audio Frequency Response
20 Hz-20 kHz, flat
Dynamic Range 120 dB, extended
Tuning Range Up to 64 MHz
Dimensions 7.75" x 6.75" x 1.65" (197 mm x 171 mm x 42 mm), H x W x D
Weight 2.0 lbs (913 g), without antennas
Housing Galvanized steel
For further assistance or questions please contact a Whoisblest Specialist by typing "Help" in our chatbox. We look forward to hearing from you.

Top-Sellers

...
Sale

AKG| K371 PROFESSIONAL HEADPHONES | AKG

0 Reviews

$149.00 $186.25

...
Sale